AMPHENOL POWER CONNECTORS
LOCK
THE
CONNECTION.
EV and aerospace-grade battery connectors. Built for applications where failure is not an option.
RADSOK
CONTACT TECHNOLOGY
M6 x 1 / M8×1.25
THREAD STANDARD
AMPHENOL
EV · AEROSPACE · HEAVY EQUIPMENT
01
More Contact.
Less Resistance.
RADSOK hyperbolic grid maximizes pin-to-socket surface area. Less resistance means more power reaches its destination.
02
Vibration
Doesn’t Move It.
Traditional ring terminals rely on a bolt staying tight. Radlok presses and locks. No backing off under load or vibration.
03
Threads Into
What You Have.
Drop-in for any M8×1.25 hole. Thread the stud in, press the cable end on. No modifications required.
Radlok 5.7mm
OEM
POSITION
Factory battery location
Wire4 – 6 AWG Copper
ThreadM8×1.25 / M6×1.0
CrimperHex Hydraulic
Starts at$11.00 CAD
Radlok 8mm
RELOCATED
BATTERY
Trunk / extended wire run
Wire2 AWG Copper
ThreadM8×1.25
CrimperHex Hydraulic
Use caseHigher current, longer run
Shop Radlok
-
Radlok 5.7mm Stud — m8x1.2 Male
$17.00 -
Radlok 5.7mm Bulkhead Connector — Black
$17.00 -
Radlok 5.7mm Connector – Black
$17.00 -
Radlok 5.7mm Connector – Red
$17.00 -
Radlok 5.7mm Stud — m6x1.0 Male
$11.00 -
Radlok 5.7mm Stud – m8x1.25 Female
$15.99 -
Radlok 5.7mm Stud – m6x1.0 Female
$15.99
01
Size Your Run
OEM position → 5.7mm. Relocated battery → 8mm.
02
Check Conductor
6 AWG bare conductor ≈ 4mm. Verify with a caliper before crimping.
03
Thread the Stud
Into existing M8×1.25. No modifications to your battery terminal.
04
Press and Lock
Cable end presses on. Locks in place. Resistant to vibration and corrosion.
