Radlok 3.6mm Connector – Black

Radlok 3.6mm Connector – Black

A genuine Amphenol Radlok 3.6mm press-lock power connector in black. Crimps directly onto 8 AWG copper wire using a hex hydraulic crimper. The 3.6mm system is purpose-built for low-to-mid current circuits — ECU grounds, sensor grounds, accessory power runs, and auxiliary circuits that don’t carry high current loads. Anywhere you currently have a ring terminal bolted to a post, this replaces it with a connection that locks in place, resists vibration, and disconnects in a single motion when you need it to. The 3.6mm Radlok format is rated for 8 AWG wire. Your circuit must be wired in 8 AWG for this connector to work — undersized wire defeats the purpose of a quality connection, and oversized wire won’t crimp correctly into the socket. If your application runs heavier wire or carries significant current demand, move up to the Radlok 5.7mm system. Crimping this connector requires a hex hydraulic crimper, available on Amazon or similar. No special tools beyond that — once crimped, the connector presses onto any compatible 3.6mm Radlok stud and locks in place with a single finger. No exposed terminals, no loose hardware, and a connection that stays put regardless of vibration. Factory Part Number: N/A